gunnwild1
gunnwild1 22 Dec 2020
103

Up next


M*CARBO Hi-Point Parts Recall

 667 Views
In General

The stainless steel guide rod and extra power recoil spring for Hi-Point carbines from M*CARBO has been recalled.

Here are the emails I received from M*CARBO about the recall:

IMPORTANT RECALL NOTICE FOR ALL HI-POINT CARBINE EXTRA POWER RECOIL SPRINGS PURCHASED FROM M*CARBO BETWEEN 12/08/2019 – 12/07/2020

M*CARBO and Hi-Point have identified that the use of an Extra Power Recoil Spring inside the Hi-Point Carbine can cause damage to the Hi-Point Carbine Breech Bolt, making the firearm inoperable and potentially cause harm to the user.

Hi-Point informed us that they have had to warranty broken breech bolts that they initially determined were the result of the Stainless-Steel Guide Rod used inside the Hi-Point Carbine but also suspected the Extra Power Recoil Spring could have aided in damaging the breech bolt as well.

Hi-Point further explained that the factory plastic guide pin was designed to act as a buffer instead of a guide rod. The Extra Power Recoil Spring would increase the speed at which the Breech Bolt would return to make contact with the Receiver so while we are at it with recalling the guide rod we want to cover all possibilities.

In order to prevent any issues with your firearm, M*CARBO has voluntarily initiated an Additional Product Recall for both versions of the Hi Point Carbine Extra Power Recoil Spring.

SKU # 22229222366666.380-9mm-40cal
SKU # 2222922236666610mm-45
If you are experiencing any issues at all with your Hi Point Carbine, rest assured that Hi Point is still leading the industry with their No-Questions-Asked Lifetime Warranty and they mean it.

STOP USING YOUR HI-POINT CARBINE WITH THE EXTRA POWER RECOIL SPRING. REVERT TO THE FACTORY RECOIL SPRING.

REMEDY/ACTION TO BE TAKEN:

Remove the Hi-Point Carbine EXTRA POWER RECOIL SPRING from your firearm and replace it with the Factory Recoil Spring.
If you no longer have the Factory Recoil Spring Contact Hi-Point for a factory replacement under their Lifetime Warranty Program. (419)747-9444
Click the Link Below for a Pre-Paid Shipping Label to Return the Extra Power Recoil Spring to M*CARBO.
https://track.shipstation.com/....f/r/f/3vj6LcWbK7hVW4

Once your Return has been received and processed, we will issue a Refund to the Original Card of Purchase in the amount of $9.95.
For Assistance Contact M*CARBO Customer Service (727)223-1816 Mon-Friday 9am – 4pm.
Email us for a Faster Response: [email protected]


IMPORTANT RECALL NOTICE FOR ALL STAINLESS-STEEL HI-POINT CARBINE GUIDE RODS PURCHASED FROM M*CARBO BETWEEN 01/08/2020 – 12/07/2020

M*CARBO and Hi-Point have identified that the use of a Stainless Steel Guide Rod inside the Hi-Point Carbine can cause damage to the Hi-Point Carbine Breech Bolt, making the firearm inoperable and potentially cause harm to the user.

Hi-Point informed us that they have had to warranty broken breech bolts that they determined were the result of the Stainless-Steel Guide Rod used inside the Hi-Point Carbine.

Hi-Point further explained that the factory plastic guide pin was designed to act as a buffer instead of a guide rod. The Stainless-Steel Guide Rod was never designed to operate like a buffer assembly.

In order to prevent any issues with your firearm, M*CARBO has voluntarily initiated an Immediate Product Recall for the Hi Point Carbine Stainless Steel Guide Rod.

SKU # 22229222477777
If you are experiencing any issues at all with your Hi Point Carbine, rest assured that Hi Point is still leading the industry with their No-Questions-Asked Lifetime Warranty and they mean it.

STOP USING YOUR HI-POINT CARBINE WITH THE STAINLESS STEEL GUIDE ROD. REVERT TO THE FACTORY PLASTIC GUIDE ROD.

REMEDY/ACTION TO BE TAKEN:

Remove the Hi-Point Carbine Stainless Steel Guide Rod from your firearm and replace it with the Factory Plastic Guide Rod.
If you no longer have the Factory Plastic Guide Rod Contact Hi-Point for a factory replacement under their Lifetime Warranty Program. (419)747-9444
Click Link Below for a Pre-Paid Shipping Label to Return the Recalled Guide Rod to M*CARBO.
https://track.shipstation.com/....f/r/f/3vj6LcWbK7hVW4

Once your Return has been received and processed, we will issue a Refund to the Original Card of Purchase in the amount of $9.95.
For Assistance Contact M*CARBO Customer Service (727)223-1816 Mon-Friday 9am – 4pm.
Email us for a Faster Response: [email protected]
--------------------------------------------------------------------------------------------------------------------------------------------------

Please Fill out this Portion and Return with the Stainless Steel Hi-Point Carbine Guide Rod for Faster Service:

Name:_____________________________________

Original Order Number:_____________________________

Email:_____________________________________

Phone Number:_____________________________



Phone: (727) 223-1816 | Email: [email protected]

#mcarborecall #hipointcarbine #2ASTRONG

Show more

Up next