How To Install The Apex Action Enhancement Kit For The CZ P-10

 319 Views
In General

Apex's Scott Folk walks you through the proper way to install the Apex Action Enhancement Kit for the 9mm P-10 C, S & F model pistols from CZ.

Recommended Tools:
– Flat Blade Screwdriver
– 1/8" Roll Pin Starter Punch
– 3/32" Roll Pin Punch
– 1/8" Roll Pin Punch
– 3/32" Pin Punch
– Small 6oz to 8oz Hammer
– A Roll of Tape
– Smooth Jaw Vise

Timecodes
0:00 - Intro
0:36 - Two Trigger Pull Options
1:17 - Kit Contents
1:29 - Tools
1:54 - Trigger Bar Advice & ID
2:52 - Remove Disassembly Plate
3:30 - Remove Disassembly Plate Retainer & Spring
3:47 - Remove Front Locking Block & Trigger Pivot Pins
4:10 - Remove Locking Block & Slide Lock Lever
4:30 - Remove Remaining Rear Pins
5:26 - Remove Sear Housing & Trigger Bar ID
5:51 - Remove Factory Disconnector
6:11 - Swapping Trigger Bars (if needed)
8:13 - Remove Trigger Body from Trigger Bar
8:44 - Apex vs Factory Parts Comparison
9:08 - Install Trigger Bar Pin & Mount Apex Trigger Body onto Trigger Bar
10:40 - Install Apex Disconnector (if installing full kit)
12:00 - Reinstall Sear Housing & Trigger Assembly
12:13 - Reinstall Sear Housing Pins
13:33 - Slide Lock Lever & Locking Block Assembly
14:40 - Install Locking Block & Slide Lock Lever Assembly
14:55 - Reinstall Trigger Pivot & Locking Block Pins
16:13 - Install Disassembly Plate, Retainer & Spring
17:26 - Replace Factory Slide Cover Plate w/ Apex Cover Plate (required)
18:18 - Function Check of Assembled Frame
19:04 - Proper Lubrication of Slide, Frame & Barrel
20:50 - P-10 Reassemble & Final Function Check

————————
SOCIAL LINKS
————————

FULL30: https://www.full30.com/channels/apext...
INSTAGRAM: https://www.instagram.com/apextactical
FACEBOOK: https://www.facebook.com/apextactical
TWITTER: https://twitter.com/apextactical
GUNSTREAMER: https://gunstreamer.com/@ApexTactical

Customer Service Inquiries: [email protected]
© Apex Tactical Specialties

Show more